Mechanical, Materials, and Aerospace Engineering
Faculty with Research Interests
For more information regarding faculty visit the Department of Mechanical, Materials, and Aerospace Engineering website .
The Department of Mechanical, Materials, and Aerospace Engineering offers several flexible programs in mechanical and aerospace engineering, with five major areas of study: computer-aided design and manufacturing, dynamics and control, fluid dynamics, solids and structures, and thermal sciences. The department also offers programs in materials science and engineering and manufacturing engineering.
Mechanical and aerospace engineering laboratories include the Fejer Unsteady Wind Tunnel; the Morkovin Low-Turbulence Wind Tunnel; the National Diagnostic Facility, a computer-controlled, high-speed, subsonic flow wind tunnel; a high-speed jet facility for aeroacoustic research; a hydrodynamics laboratory; flow visualization systems; laser-based measuring equipment and manufacturing; several computer-based data acquisition, processing and display systems of the Fluid Dynamics Research Center; laboratories in experimental mechanics; laboratories for research in robotics, guidance and navigation, computer integrated manufacturing, Footlik CAD lab, biomechanics and its instrumentation, combustion, and internal combustion engines.
Materials science and engineering laboratories include facilities for research in metallography, heat treatment, and mechanical testing; optical, scanning, and transmission electron microscopes; powder metallurgy, and laser machining facilities. The department has numerous computers and workstations available for computational research activities.
The faculty conducts research activities in fluid dynamics, including aeroacoustics, flow control, turbulent flows, unsteady and separated flows, instabilities and transition, turbulence modeling, flow visualization techniques, computational fluid dynamics; metallurgical and materials engineering, including microstructural characterization, physical metallurgy of ferrous and nonferrous alloys, powder materials, laser processing and machining, high temperature structural materials, mechanical behavior, fatigue and fracture, environmental fatigue and fracture, computational x-ray diffraction analysis, texture, recrystallization and computational methods in materials processing; solids and structures, including experimental mechanics of composites and cellular solids, high strain rate constitutive modeling and thermomechanical coupling, fracture mechanics, design and testing of prosthetic devices; computational mechanics, cable dynamics and analysis of inelastic solids; theoretical mechanics, including wave propagation, fracture, elasticity and models for scoliosis; computer added design and manufacturing, concentrated in the areas of computer-aided design, computer-based machine tool control, computer graphics in design, manufacturing processes, wear and fracture behavior of cutting tools, tribology, frictional wear characteristics of ceramics, dynamic systems, and mechanical vibrations; thermal sciences, alternative fuels, mobile and stationary source combustion emissions, and dynamics and control, including guidance, navigation, and control of aircraft and spacecraft, intelligent control for aircraft models, flow fields, robotics devices for laser machining; and dynamic analysis and control of complex systems.
Cumulative minimum undergraduate GPA: 3.0/4.0
GRE score minimum:
1000 (quantitative + verbal) 3.0 (analytical writing)
Typical admitted quantitative score is 650.
TOEFL minimum: 550/213/801
Meeting the minimum GPA and test score requirements does not guarantee admission. Test scores and GPA are only two of several important factors considered. Admission as a regular graduate student normally requires a bachelor’s degree from an accredited institution in mechanical engineering, aerospace engineering, metallurgical engineering, materials engineering, or engineering mechanics. A candidate with a bachelor’s degree in another field, and with proficiency in other engineering disciplines, mathematics, and physics, may also be eligible for admission. However, students must remove any deficiencies in essential undergraduate courses that are prerequisites for the chosen degree program, in addition to meeting the other requirements of the graduate program.
The chair for graduate programs serves as a temporary adviser to new full-time and part-time graduate students admitted to the department as matriculated students until an appropriate faculty member is selected as the adviser. Students are responsible for following the departmental procedures for graduate study. A guide to graduate study in the department is available on the departmental website and in the MMAE main office (243 John T. Rettaliata Engineering Center) to all registered MMAE graduate students, and should be consulted regularly for information on procedures, deadlines, forms, and examinations. Departmental seminars and colloquia are conducted on a regular basis. All full-time graduate students must register for the MMAE 593 seminar course each semester and attend them regularly.
The department reserves the right to review and approve or deny the application for admission of any prospective degree-seeking student. Non-degree graduate students who intend to seek a graduate degree from the department must maintain a GPA of 3.0 and must apply for admission as a degree-seeking student prior to the completion of 9 credit hours of study. Maintaining the minimum GPA requirement does not guarantee admission to MMAE graduate degree programs. A maximum of 9 credit hours of approved coursework taken as a non-degree student and passed with a grade of “B” or better may be applied to the degree.
Paper-based/computer-based/internet-based test score.
- Master of Engineering in Manufacturing Engineering
- Master of Engineering in Manufacturing Engineering via Internet
- Master of Engineering in Materials Science and Engineering
- Master of Engineering in Mechanical and Aerospace Engineering
- Master of Science in Manufacturing Engineering
- Master of Science in Materials Science and Engineering
- Master of Science in Mechanical and Aerospace Engineering
- Doctor of Philosophy in Materials Science and Engineering
- Doctor of Philosophy in Mechanical and Aerospace Engineering
- Master of Engineering in Materials Science and Engineering with Specialization in Energy/Environment/Economics (E3)
- Master of Engineering in Mechanical and Aerospace Engineering with Specialization in Energy/Environment/Economics (E3)
- Master of Science in Materials Science and Engineering with Specialization in Energy/Environment/Economics (E3)
- Master of Science in Mechanical and Aerospace Engineering with Specialization in Energy/Environment/Economics (E3)
- Doctor of Philosophy in Mechanical and Aerospace Engineering with Specialization in Energy/Environment/Economics (E3)
Vectors and matrices, systems of linear equations, linear transformations, eigenvalues and eigenvectors, systems of ordinary differential equations, decomposition of matrices, and functions of matrices. Eigenfunction expansions of differential equations, self-adjoint differential operators, Sturm-Liouville equations. Complex variables, analytic functions and Cauchy-Riemann equations, harmonic functions, conformal mapping, and boundary-value problems. Calculus of variations, Euler's equation, constrained functionals, Rayleigh-Ritz method, Hamilton's principle, optimization and control. Prerequisite: An undergraduate course in differential equations.
Generalized functions and Green's functions. Complex integration: series expansions of complex functions, singularities, Cauchy's residue theorem, and evaluation of real definite integrals. Integral transforms: Fourier and Laplace transforms, applications to partial differential equations and integral equations.
Selected topics in advanced engineering analysis, such as ordinary differential equations in the complex domain, partial differential equations, integral equations, and/or nonlinear dynamics and bifurcation theory, chosen according to student and instructor interest.
Asymptotic series, regular and singular perturbations, matched asymptotic expansions, and WKB theory. Methods of strained coordinates and multiple scales. Application of asymptotic methods in science and engineering.
A unified treatment of topics common to solid and fluid mechanics. Cartesian tensors. Deformation, strain, rotation and compatibility equations. Motion, velocity gradient, vorticity. Momentum, moment of momentum, energy, and stress tensors. Equations of motion, frame indifference. Constitutive relations for elastic, viscoelastic, and fluids and plastic solids.
Kinematics of fluid motion. Constitutive equations of isotropic viscous compressible fluids. Derivation of Navier-Stokes equations. Lessons from special exact solutions, self-similarity. Admissibility of idealizations and their applications; inviscid, adiabatic, irrotational, incompressible, boundary-layer, quasi one-dimensional, linearized and creeping flows. Vorticity theorems. Unsteady Bernoulli equation. Basic flow solutions. Basic features of turbulent flows.
Low-speed compressible flow past bodies. Linearized, subsonic, and supersonic flow past slender bodies. Similarity laws. Transonic flow. Hypersonic flow, mathematical theory of characteristics. Applications including shock and nonlinear wave interaction in unsteady one-dimensional flow and two-dimensional, planar and axisymmetric supersonic flow.
Navier-Stokes equations and some simple exact solutions. Oseen-Stokes flows. Boundary-layer equations and their physical interpretations. Flows along walls, and in channels. Jets and wakes. Separation and transition to turbulence. Boundary layers in unsteady flows. Thermal and compressible boundary layers. Mathematical techniques of similarity transformation, regular and singular perturbation, and finite differences.
Stationary random functions. Correlation tensors. Wave number space. Mechanics of turbulence. Energy spectrum. Dissipation and energy cascade. Turbulence measurements. Isotropic turbulence. Turbulent transport processes. Mixing and free turbulence. Wall-constrained turbulence. Compressibility effects. Sound and pseudo-sound generated by turbulence. Familiarity with basic concepts of probability and statistics and with Cartesian tensors is assumed.
Concept of hydrodynamic stability. Governing equations. Analytical and numerical treatment of eigenvalue problems and variational methods. Inviscid stability of parallel flows and spiral flows. Thermal instability and its consequences. Stability of channel flows, layered fluid flows, jets and flows around cylinders. Other effects and its consequences; moving frames, compressibility, stratification, hydromagnetics. Nonlinear theory and energy methods. Transition to turbulence.
Characteristics of sound waves in two and three dimensions. External and internal sound wave propagation. Transmission and reflection of sound waves through media. Sources of sound from fixed and moving bodies. Flow-induced vibrations. Sound-level measurement techniques.
Design and use of multiple sensor probes to measure multiple velocity components, reverse-flow velocities, Reynolds stress, vorticity components and intermittency. Simultaneous measurement of velocity and temperature. Theory and use of optical transducers, including laser velocimetry and particle tracking. Special measurement techniques applied to multiphase and reacting flows. Laboratory measurements in transitional and turbulent wakes, free-shear flows, jets, grid turbulence and boundary layers. Digital signal acquisitions and processing. Instructor's consent required.
Classification of partial differential equations. Finite-difference methods. Numerical solution techniques including direct, iterative, and multigrid methods for general elliptic and parabolic differential equations. Numerical algorithms for solution of the Navier-Stokes equations in the primitive-variables and vorticity-stream function formulations. Grids and grid generation. Numerical modeling of turbulent flows. Additional Prerequisite: An undergraduate course in numerical methods.
Application of advanced numerical methods and techniques to the solution of important classes of problems in fluid mechanics. Emphasis is in methods derived from weighted-residuals approaches, like Galerkin and Galerkin-Tau methods, spectral and pseudospectral methods, and dynamical systems modeling via projections on arbitrary orthogonal function bases. Finite element and spectral element methods will be introduced briefly in the context of Galerkin methods. A subsection of the course will be devoted to numerical turbulence modeling, and to the problem of grid generation for complex geometries.
Anatomy of the cardiovascular system. Scaling principles. Lumped parameter, one-dimensional linear and nonlinear wave propagation, and three-dimensional modeling techniques applied to simulate blood flow in the cardiovascular system. Steady and pulsatile flow in rigid and elastic tubes. Form and function of blood, blood vessels, and the heart from an engineering perspective. Sensing, feedback, and control of the circulation. Includes a student project.
Macroscopic thermodynamics: first and second laws applied to equilibrium in multicomponent systems with chemical reaction and phase change, availability analysis, evaluations of thermodynamic properties of solids, liquids, and gases for single and multicomponent systems. Applications to contemporary engineering systems. Prerequisite: An undergraduate course in applied thermodynamics.
Principles, technology, and hardware used for conversion of nuclear, fossil-fuel, and sustainable energy into electric power will be discussed. Thermodynamic analysis -- Rankine cycle. Design and key components of fossil-fuel power plants. Nuclear fuel, reactions, materials. Pressurized water reactors (PWR). Boiling water reactors (BWR). Canadian heavy water (CANDU) power plants. Heat transfer from the nuclear fuel elements. Introduction to two phase flow: flow regimes; models. Critical heat flux. Environmental effects of coal and nuclear power. Design of solar collectors. Direct conversion of solar energy into electricity. Wind power. Geothermal energy. Energy conservation and sustainable buildings. Enrichment of nuclear fuel. Nuclear weapons and effects of the explosions.
Thermodynamic, combustion, and heat transfer analyses relating to steam-turbine and gas-turbine power generation. Environmental impacts of combustion power cycles. Consideration of alternative and sustainable power generation processes such as wind and tidal, geothermal, hydroelectric, solar, fuel cells, nuclear power, and microbial. Prerequisite: An undergraduate course in applied thermodynamics.
Combustion stoichiometry. Chemical equilibrium. Adiabatic flame temperature. Reaction kinetics. Transport processes. Gas flames classification. Premixed flames. Laminar and turbulent regimes. Flame propagation. Deflagrations and detonations. Diffusion flames. Spray combustion. The fractal geometry of flames. Ignition theory. Pollutant formation. Engine combustion. Solid phase combustion. Combustion diagnostics. Prerequisite: An undergraduate course in thermodynamics and heat transfer or instructor consent.
Modes and fundamental laws of heat transfer. The heat equations and their initial and boundary conditions. Conduction problems solved by separation of variables. Numerical methods in conduction. Forced and natural convection in channels and over exterior surfaces. Similarity and dimensionless parameters. Heat and mass analogy. Effects of turbulence. Boiling and condensation. Radiation processes and properties. Blackbody and gray surfaces radiation. Shape factors. Radiation shields. Prerequisite: An undergraduate course in heat transfer.
Fundamental laws of heat conduction. Heat equations and their initial and boundary conditions. Steady, unsteady and periodic states in one or multidimensional problems. Composite materials. Methods of Green's functions, eigenfunction expansions, finite differences, finite element methods.
Convective heat transfer analyses of external and internal flows. Forced and free convection. Dimensional analysis. Phase change. Heat and mass analogy. Reynolds analogy. Turbulence effects. Heat exchangers, regenerators. Basic laws of Radiation Heat Transfer. Thermal radiation and quantum mechanics pyrometry. Infrared measuring techniques.
Phenomenological nature of metals, yield criteria for 3-D states of stress, geometric representation of the yield surface. Levy-Mises and Prandtl-Reuss equations, associated and non-associated flow rules, Drucker's stability postulate and its consequences, consistency condition for nonhardening materials, strain hardening postulates. Elastic plastic boundary value problems. Computational techniques for treatment of small and finite plastic deformations.
Mathematical foundations: tensor algebra, notation and properties, eigenvalues and eigenvectors. Kinematics: deformation gradient, finite and small strain tensors. Force and equilibrium: concepts of traction/stress, Cauchy relation, equilibrium equations, properties of stress tensor, principal stresses. Constitutive laws: generalized Hooke's law, anisotropy and thermoelasticity. Boundary value problems in linear elasticity: plane stress, plane strain, axisymmetric problems, Airy stress function. Energy methods for elastic solids. Torsion. Elastic and inelastic stability of columns.
Notion of stress and strain, field equations of linearized elasticity. Plane problems in rectangular and polar coordinates. Problems without a characteristic length. Plane problems in linear elastic fracture mechanics. Complex variable techniques, energy theorems, approximate numerical techniques.
Continuation of MMAE 451/CAE 442. Covers the theory and practice of advanced finite element procedures. Topics include implicit and explicit time integration, stability of integration algorithms, unsteady heat conduction, treatment of plates and shells, small-strain plasticity, and treatment of geometric nonlinearity. Practical engineering problems in solid mechanics and heat transfer are solved using MATLAB and commercial finite element software. Special emphasis is placed on proper time step and convergence tolerance selection, mesh design, and results interpretation.
Analysis of the general state of stress and strain in solids; dynamic fracture tests (FAD, CAT). Linear elastic fracture mechanics (LEFM), Griffith-Irwin analysis, ASTM, KIC, KIPCI, KIA, KID. Plane stress, plane strain; yielding fracture mechanics (COD, JIC). Fatigue crack initiation. Goodman diagrams and fatigue crack propagation. Notch sensitivity and stress concentrations. Low-cycle fatigue, corrosion and thermal fatigue. Prerequisite: An undergraduate course in mechanics of solids.
This is an introductory course on wave propagation. Although the ideas are presented in the context of elastic waves in solids, they easily carry over to sound waves in water and electromagnetic waves. The topics include one dimensional motion of elastic continuum, traveling waves, standing waves, energy flux, and the use of Fourier integrals. Problem statement in dynamic elasticity, uniqueness of solution, basic solution of elastodynamics, integral representations, steady state time harmonic response. Elastic waves in unbounded medium, plane harmonic waves in elastic half-spaces, reflection and transmission at interfaces, Rayleigh waves, Stoneley waves, slowness diagrams, dispersive waves in waveguides and phononic composites, thermal effects and effects of viscoelasticity, anisotropy, and nonlinearity on wave propagation.
Review of applied elasticity. Stress, strain and stress-strain relations. Basic equations and boundary value problems in plane elasticity. Methods of strain measurement and related instrumentation. Electrical resistance strain gauges, strain gauge circuits and recording instruments. Analysis of strain gauge data. Brittle coatings. Photoelasticity; photoelastic coatings; moire methods; interferometric methods. Applications of these methods in the laboratory. Prerequisite: An undergraduate course in mechanics of solids.
Kinematics and inverse kinematics of manipulators. Newton-Euler dynamic formulation. Independent joint control. Trajectory and path planning using potential fields and probabilistic roadmaps. Adaptive control. Force control.
Kinematics of rigid bodies. Rotating reference frames and coordinate transformations; Inertia dyadic. Newton-Euler equations of motion. Gyroscopic motion. Conservative forces and potential functions. Generalized coordinates and generalized forces. Lagrange's equations. Holonomic and nonholonomic constraints. Lagrange multipliers. Kane's equations. Elements of orbital and spacecraft dynamics. Additional Prerequisite: An undergraduate course in dynamics.
This course will cover analytical and computational methods for studying nonlinear ordinary differential equations especially from a geometric perspective. Topics include stability analysis, perturbation theory, averaging methods, bifurcation theory, chaos, and Hamiltonian systems.
Review of classical control. Discrete-time systems. Linear difference equations. Z-transform. Design of digital controllers using transform methods. State-space representations of continuous and discrete-time systems. State feedback. Controllability and observability. Pole placement. Optimal control. Linear-Quadratic Regulator (LQR). Probability and stochastic processes. Optimal estimation. Kalman Filter. Additional Prerequisite: An undergraduate course in classical control.
Optimization theory and practice with examples. Finite-dimensional unconstrained and constrained optimization, Kuhn-Tucker theory, linear and quadratic programming, penalty methods, direct methods, approximation techniques, duality. Formulation and computer solution of design optimization problems in structures, manufacturing and thermofluid systems. Prerequisite: An undergraduate course in numerical methods.
Interactive computer graphics in mechanical engineering design and manufacturing. Mathematics of three-dimensional object and curved surface representations. Surface versus solid modeling methods. Numerical control of machine tools and factory automation. Applications using commercial CAD/CAM in design projects.
Introduction to advanced manufacturing processes, such as powder metallurgy, joining and assembly, grinding, water jet cutting, laser-based manufacturing, etc. Effects of variables on the quality of manufactured products. Process and parameter selection. Important physical mechanisms in manufacturing process. Prerequisite: An undergraduate course in manufacturing processes or instructor consent.
The use of computer systems in planning and controlling the manufacturing process including product design, production planning, production control, production processes, quality control, production equipment and plant facilities.
Team-based project. Microprocessor controlled electromechanical systems. Sensor and actuator integration. Basic analog and digital circuit design. Limited Enrollment.
Overview of the space environment, particularly Earth's ionosphere, magnetosphere, and interplanetary space. Effects of solar activity on geospace variability. Basic plasma characteristics. Single particle motions. Waves in magnetized plasmas. Charged particle trapping in planetary magnetic fields and its importance in near-earth-space phenomena. Macroscopic equations for a conducting fluid. Ground and space-based remote sensing and in situ measurement techniques. Space weather effects on human-made systems. Students must have already taken undergraduate courses in electromagnetics and in fluid mechanics.
Electronic structure of solids. Conductors, semiconductors, dielectrics, superconductors. Ferroelectric and piezoelectric materials. Magnetic properties, magnetocrystalline, anisotropy, magnetic materials and devices. Optical properties and their applications.
Fundamental concepts of positioning and dead reckoning. Principles of modern satellite-based navigation systems, including GPS, GLONASS, and Galileo. Differential GPS (DGPS) and augmentation systems. Carrier phase positioning and cycle ambiguity resolution algorithms. Autonomous integrity monitoring. Introduction to optimal estimation, Kalman filters, and covariance analysis. Inertial sensors and integrated navigation systems.
Includes an overview of scanning probe microscopy and of AFM imaging: mathematical morphology; imaging simulation and surface recognition; and high-speed AFM imaging. Also covers nanoscale physics, including probing nanoscale forces, van der Waals force, electrostatic force, and capillary force. Nanomanipulation topics such as mechanical scratching and pushing electrophoresis, and augmented reality. Manipulation automation and manipulation planning. Applications of selected topics covered.
Advanced topics in Computer-Integrated Manufacturing, including control systems, group technology, cellular manufacturing, flexible manufacturing systems, automated inspection, lean production, Just-In-Time production, and agile manufacturing systems.
Basic theory, methods and techniques of on-line, feedback quality control systems for variable and attribute characteristics. Methods for improving the parameters of the production, diagnosis, and adjustment processes so that quality loss is minimized. Same as CHE 560.
Properties of melts and solids. Thermodynamic and heat transfer concepts. Single and poly-phase alloys. Macro and micro segregation. Plane-front solidification. Solute boundary layers. Constitutional supercooling. Convection in freezing melts. Effective segregation coefficients. Zone freezing and purification. Single crystal growth technology. Czochralski, Kyropulous, Bridgman, and Floating Zone methods. Control of melt convection and crystal composition. Equipment. Process control and modeling. Laboratory demonstration. Prerequisite: A background in crystal structure and thermodynamics.
Phase rule, multicomponent equilibrium diagrams, determination of phase equilibria, parameters of alloy development, prediction of structure and properties. Prerequisite: A background in phase diagrams and thermodynamics.
Analysis of the general state of stress and strain in solids. Analysis of elasticity and fracture, with a major emphasis on the relationship between properties and structure. Isotropic and anisotropic yield criteria. Testing and forming techniques related to creep and superplasticity. Deformation mechanism maps. Fracture mechanics topics related to testing and prediction of service performance. Static loading to onset of rapid fracture, environmentally assisted cracking fatigue, and corrosion fatigue. Prerequisite: A background in mechanical properties.
Basic characteristics of dislocations in crystalline materials. Dislocations and slip phenomena. Application of dislocation theory to strengthening mechanisms. Strain hardening. Solid solution and particle strengthening. Dislocations and grain boundaries. Grain size strengthening. Creep. Fatigue. Prerequisite: Background in materials analysis.
Advanced synthesis projects studying microstructure and properties of a series of binary and ternary alloys. Gain hands-on knowledge of materials processing and advanced materials characterization through an integrated series of experiments to develop understanding of the processing-microstructure-properties relationship. Students arc melt a series of alloys, examine the cast microstructures as a function of composition using optical and electron microscopy, DTA, EDS, and XRD. The alloys are treated in different thermal and mechanical processes. The microstructural and mechanical properties modification and changes during these processes are characterized. Groups of students will be assigned different alloy systems, and each group will present their results orally to the class and the final presentation to the whole materials science and engineering group.
Temperature-dependent mechanical properties. Creep mechanisms. Basic concepts in designing in high-temperature materials. Metallurgy of basic alloy systems. Surface stability. High-temperature oxidation. Hot corrosion. Coatings and protection. Elements of process metallurgy.Prerequisite: Background in mechanical properties, crystal defects, and thermodynamics.
Basic mechanisms of fracture and embrittlement of metals. Crack initiation and propagation by cleavage, microvoid coalescence, and fatigue mechanisms. Hydrogen embrittlement, stress corrosion cracking and liquid metal embrittlement. Temper brittleness and related topics.Prerequisite: Background in crystal structure, defects, and mechanical properties.
Theory, techniques and interpretation of diffusion studies in metals. Prerequisite: Background in crystal structures, defects, and thermodynamics.
Thermodynamics and kinetics of phase transformations, theory of nucleation and growth, metastability, phase diagrams.Prerequisite: Background in phase diagrams and thermodynamics.
Advanced theories and computational methods used to understand and predict material properties. This course will introduce energy models from classical and first-principles approaches, density functional theory, molecular dynamics, thermodynamic modeling, Monte Carlo simulations, and data mining in materials science. The course will also include case studies of computational materials research (e.g. alloy design, energy storage, nanoscale properties). The course consists of both lectures and computer labs. Background in thermodynamics is required.
Advanced optical microscopy. Scanning and transmission electron microscopes. X-ray microanalysis. Surface characterization. Quantitative microscopy. Elements of applied statistics.
Design, construction and operation of transmission electron microscope, including image formation and principles of defect analysis in materials science applications. Theory and use of state-of-the-art micro characterization techniques for morphological, crystallographic, and elemental analysis at high spatial resolutions at 10 nanometers in metallurgical and ceramic studies will also be covered.
Allotropic modifications in iron and solid solution effects of the important alloying elements on iron. Physical metallurgy of pearlite, bainite and martensite reactions. Physical and mechanical property changes during eutectoid decomposition and tempering.Prerequisite: Background in phase diagrams and thermodynamics.
Context of selection; decision analysis; demand, materials and processing profiles; design criteria; selection schemes; value and performance oriented selection; case studies.
Basic concepts and definitions. Current and potential applications of composite materials. Fibers, Matrices, and overview of manufacturing processes for composites. Review of elasticity of anisotropic solids and transformation of stiffness/compliance matrices. Micromechanics: methods for determining mechanical properties of heterogeneous materials. Macromechanics: ply analysis, off-axis stiffness, description of laminates, laminated plate theories, special types of laminates. Applications of concepts to the design of simple composite structural components. Failure theories, hydrothermal effects.Prerequisite: Background in polymer synthesis and properties.
Processing science and fundamentals in making advanced materials, particularly nanomaterials and composites. Applications of the processing science to various processing technologies including severe plastic deformation, melt infiltration, sintering, co-precipitation, sol-gel process, aerosol synthesis, plasma spraying, vapor-liquid-solid growth, chemical vapor deposition, physical vapor deposition, atomic layer deposition, and lithography.
Classical thermodynamics with emphasis on solutions and phase equilibria in solids, liquids, and gases. Applications to unary and multicomponent, reacting and nonreacting, and homogeneous and heterogeneous systems including development of phase diagrams.
Fundamentals of geometrical and physical optics as related to problems in engineering design and research; fundamentals of laser-material interactions and laser-based manufacturing processes. This is a lecture-dominated class with around three experiments organized to improve students' understanding of the lectures. The topics covered include: geometrical optics (law of reflection and refraction, matrix method, etc.); physical optics (wave equations, interference, polarization, Fresnel equations, etc.); optical properties of materials and Drude theory; laser fundamentals; laser-matter interactions and laser-induced thermal and mechanical effects, laser applications in manufacturing (such as laser hardening, machining, sintering, shock peening, and welding). Knowledge of Heat & Mass Transfer required.
This first part of a two-course sequence focuses on the primary building blocks that enable an engineer to effectively communicate and contribute as a part of a reliability engineering effort. Students develop an understanding of the long term and intermediate goals of a reliability program and acquire the necessary knowledge and tools to meet these goals. The concepts of both probabilistic and deterministic design are presented, along with the necessary supporting understanding that enables engineers to make design trade-offs that achieve a positive impact on the design process. Strengthening their ability to contribute in a cross functional environment, students gain insight that helps them understand the reliability engineering implications associated with a given design objective, and the customer's expectations associated with the individual product or product platforms that integrate the design. These expectations are transformed into metrics against which the design can be measured. A group project focuses on selecting a system, developing a flexible reliability model, and applying assessment techniques that suggest options for improving the design of the system.
This is the second part of a two-course sequence emphasizing the importance of positively impacting reliability during the design phase and the implications of not making reliability an integrated engineering function. Much of the subject matter is designed to allow the students to understand the risks associated with a design and provide the insight to reduce these risks to an acceptable level. The student gains an understanding of the methods available to measure reliability metrics and develops an appreciation for the impact manufacturing can have on product performance if careful attention is not paid to the influencing factors early in the development process. The discipline of software reliability is introduced, as well as the influence that maintainability has on performance reliability. The sequence culminates in an exhaustive review of the lesson plans in a way that empowers practicing or future engineers to implement their acquired knowledge in a variety of functional environments, organizations and industries. The group project for this class is a continuation of the previous course, with an emphasis on applying the tools and techniques introduced during this second of two courses.
Reports on current research. Full-time graduate students in the department are expected to register and attend.
Design projects for the master of mechanical and aerospace engineering, master of materials engineering, and master of manufacturing engineering degrees.
Advanced topic in the fields of mechanics, mechanical and aerospace, metallurgical and materials, and manufacturing engineering in which there is special student and staff interest. (Variable credit)
This course provides a comprehensive overview of the theory and practice of the finite element method by combining lectures with selected laboratory experiences . Lectures cover the fundamentals of linear finite element analysis, with special emphasis on problems in solid mechanics and heat transfer. Topics include the direct stiffness method, the Galerkin method, isoperimetric finite elements, equation solvers, bandwidth of linear algebraic equations and other computational issues. Lab sessions provide experience in solving practical engineering problems using commercial finite element software. Special emphasis is given to mesh design and results interpretation using commercially available pre- and post-processing software.
This course provides an introduction to Computer-Aided Design and an associated finite element analysis technique. A series of exercises and instruction in Pro/ENGINEER will be completed. The operation of Mecanica (the associated FEM package) will also be introduced. Previous experience with CAD and FEA will definitely speed learning, but is not essential.
Creep mechanisms and resistance. The use of deformation mechanisms maps in alloy design. Physical and mechanical metallurgy of high-temperature, structural materials currently in use. Surface stability: High-temperature oxidation, hot corrosion, protective coatings. Alternative materials of the 21st century. Elements of process metallurgy.
This course covers the role of reliability in robust product design. It dwells upon typical failure mode investigation and develops strategies to design them out of the product. Topics addressed include reliability concepts, systems reliability, modeling techniques, and system availability predications. Case studies are presented to illustrate the cost-benefits due to pro-active reliability input to systems design, manufacturing and testing.
Provides a comprehensive understanding of the theory and practice of advanced finite element procedures. The course combines lectures on dynamic and nonlinear finite element analysis with selected computer labs. The lectures cover implicit and explicit time integration techniques, stability of integration algorithms, treatment of material and geometric nonlinearity, and solution techniques for nonlinear finite element equations. The computer labs train student to solve practical engineering problems in solid mechanics and heat transfer using ABQUS and Hypermesh. Special emphasis is placed on proper time step and convergence tolerance selection, mesh design, and results interpretation. A full set of course notes will be provided to class participants as well as a CD-ROM containing course notes, written exercises, computer labs, and all worked out examples.
Introduction to the concepts of Engineering Economic Analysis, also known as micro-economics. Topics include equivalence, the time value of money, selecting between alternative, rate of return analysis, compound interest, inflation, depreciation, and estimating economic life of an asset.
This course will cover the basic theory and practice of project management from a practical viewpoint. Topics will include project management concepts, recourses, duration vs. effort, project planning and initiation, progress tracking methods, CPM and PERT, reporting methods, replanning, team project concepts, and managing multiple projects. Microsoft Project software will be used extensively.
This short course provides a brief introduction to the fundamentals of acoustics and the application to product noise prediction and reduction. The first part focuses on fundamentals of acoustics and noise generation. The second part of the course focuses on applied noise control.