Civil and Architectural Engr (CAE)
General introduction to the aural and visual environment. Subjective and objective scales of measurement. Laws of psychophysics. Introduction to vibration. The hearing mechanism. Transfer of sound. Passive control of noise in buildings, transmission loss. Absorption and reverberation time. Active control of the aural environment. Visual perception. Photometry, brightness, luminance and illumination. Natural lighting of buildings. Artificial lighting.
Introduction to the mechanics of solids. Energy methods and the calculus of variations. Ritz/Galerkin approximation methods. Introductory discussions on elastic stability and plate analyses.
Selection of site-dependent earthquake for retrofit. Strength and ductility of aging structures. Cyclic behavior and modeling of structures under seismic loading. Performance-based retrofit criteria. Evaluating earthquake vulnerability of existing buildings and bridges. Upgrading lateral load-carrying systems. Conceptual basis for seismic isolation and energy-absorbing techniques and their applications in earthquake hazard reduction in existing bridges and buildings. Selection of retrofit methods. Case studies of seismic retrofit of typical buildings, bridges, and industrial facilities using strength upgrading, energy dissipation devices, and base isolation.
Repair and rehabilitation of existing building exterior envelopes. The course will include problem identification, investigative techniques, repair methods, preparation of remedial design documents and general management of rehabilitation projects. Types of constructions include buildings, exterior walls, facades, cladding, roofing, plazas, porches, fire escapes, and others.
Basic sound physics and sound propagation in enclosed spaces. Sound and vibration sources in and out of buildings. Theories of sound transmission through building elements. Effects of noise and vibration on man and buildings, criteria and standards. Design of noise control systems. Calculation of airborne and impact sound insulation. Noise and vibration control implementations in various indoor spaces, such as residential units, offices, schools and mechanical rooms.
Specifications for bridge design and evaluation. Advanced bridge design and evaluation topics such as design load envelope, seismic load design, bridge condition rating, bridge load rating, and steel bridge fatigue evaluation. Bridge management systems. Life cycle analyses. Use of high performance materials in bridge engineering.
This course will discuss the design of acoustic spaces such as conference rooms, classrooms, lecture halls, music halls, theater, churches, recording studio, and home theater. Course covers the selection and determination of appropriate steady state, spatial, and temporal acoustic measures such as background noise levels, reverberation time, speech transmission index, and interaural cross correlation, as well as the selection of building materials and layout of rooms to meet those requirements.
Introduction to fire, physics and chemistry, and mass and heat transfer principles, fire fluid mechanic fundamentals, fundamentals and requirements of the burning of materials (gases, liquids, & solids), fire phenomena in enclosures such as pre-flashover and post-flashover.
Fundamentals of building design for fire and life safety. Emphasis on a systematic design approach. Basic considerations of building codes, fire loading, fire resistance, exit design, protective systems & other fire protection systems. For architects, and engineers not majoring in fire protection and safety engineering.
Introduction to fire heat transfer processes and fire testing materials; application of a set of quantitative engineering tools (fire models) to construct a description of conditions that occur or might occur during the course of a fire; life and structural impacts from hostile fires in buildings.
Study of the physical interaction of climate (humidity, temperature, wind, sun, rain, snow, etc.) and buildings. Topics include psychrometrics, indoor air quality, indoor thermal comfort, heat transfer, air infiltration, solar insolation, and heating and cooling load calculation.
Matrices, linear spaces and transformations, eigenvalue problems, and their application to civil engineering. First-order differential equations for structural dynamics. Calculus of variations and variational principles for dynamics and statics. Rayleigh-Ritz method, finite element approximations, Newmark-Beta method, Green's Function, and Duhamel Integral and their application to civil engineering.
Building energy modeling (BEM) is the core of building information modeling (BIM) and sustainable design which are changing the way of architectural design and engineering. This course builds essential knowledge of building performance simulation and provides necessary background to use a building energy simulation software tool. Proven methods for using BEM to deal with such essential building performance and sustainability issues will be presented by using real world examples placing particular emphasis on using BEM-enabled quantitative analysis to evaluate design alternatives for the whole life cycle of a building. Complete with coverage of integrated design and lean construction requirements, this is a valuable course for architects, engineers, and construction professionals involved in energy performance modeling for buildings.
Intensive study of the calculation techniques and quantitative aspects of good luminous design. Topics covered include photometric quantities and color theory, visual perception, IESNA standards, daylight and artificial illumination, radiative transfer, luminaire characteristics, control systems, and energy conservation techniques. Design and analysis problems, field measurements, and use of industry computer simulations for design and luminaire systems.
Mechanical properties of hardened concrete, including creep phenomena. Ultimate strength of columns, beams and beam-columns. Introduction to limit analysis of frames and yield-line analysis of plates.
Review of simple column buckling for various conditions. Basic considerations of stable and unstable equilibrium. Determination of buckling loads of columns with variable cross-section. Analysis of elastic stability of framed structures. Approximate solutions of more complicated problems by various numerical and energy methods. Analysis of lateral and torsional stability of beams and beam-columns. Stability in the inelastic range of columns. Buckling of plates and cylindrical shells.
An intensive study of the calculation techniques and qualitative aspects of good luminous design. Topics covered include photometric quantities and color theory, visual perception, standards, daylight and artificial illumination systems, radiative transfer, fixture and lamp characteristics, control devices and energy conservation techniques. Design problems, field measurements, computer and other models will be used to explore the major topics.
Theory of measurements, statistics, similitude, and model laws and the usefulness of structural models. Displacement and strain measurement techniques. Theory and practice of indirect model analysis. Theory and practice of direct model techniques including photo elasticity and Moire methods.
Descriptive statistics and graphs, probability distribution, random sampling, independence, significance tests, design of experiments, regression, time series analysis, statistical process control, and introduction to multivariate analysis.
Design of building exteriors, including the control of heat flow, air and moisture penetration, building movements, and deterioration. Study of the principle of rain screen walls and of energy conserving designs. Analytical techniques and building codes are discussed through case studies and design projects.
Torsion and web openings. Behavior and design of rigid and semi rigid beam-to-column connections and base plates. Inelastic behavior of steel and composite members and systems under severe cyclic loading. Design of steel-concrete composite and hybrid systems. P-delta effect and design considerations for system stability. Design of special and ordinary moment-resisting frames. Design of concentrically and eccentrically braced frames. Design of bracing for stability. Plate girders. Fatigue and fracture.
Identification of the optimal energy performance achievable with various types of buildings and service systems. Reduction of infiltration. Control systems and strategies to achieve optimal energy performance. Effective utilization of daylight, heat pumps, passive and active solar heaters, heat storage and heat pipes in new and old buildings.
Introduction to automatic control systems. Control issues related to energy conservation, indoor air quality and thermal comfort in buildings. Classification of HVAC control systems. Control systems hardware: selection & sizing of sensors, actuators & controllers. Practical HVAC control systems; elementary local loop and complete control systems. Case studies. Computer applications.
Study of the analysis and design of electrical systems in buildings utilizing the National Electric Code. Topics include AC, DC, single phase and three-phase circuits, transients, branch circuits, panel boards, system sizing, fault calculations and overcurrent protection design. Also studies the design and specification of emergency power backup and alternative power systems. Previous coursework in electrical circuits is required. Permission from the instructor is required.
Fundamentals of free, forced, and transient undamped and viscously damped vibration of single and multi-degree of freedom structures. Time, frequency, and approximate methods of analysis. Application of numerical methods in time and frequency domain. Response spectra, modes, coupling and modal space. Response history and response spectrum analyses and an introduction to earthquake engineering.
Advanced and special topics in finite element analysis such as finite element-boundary element method, plates, and shell analysis using finite elements.
Exact and approximate stress analysis of elastic, isotropic plates of various shapes acted upon by forces in their plane, as well as transverse forces. Stability of plates with various edge conditions, orthotropic plates, elastically supported plates and simple cylinders. Approximate methods such as finite differences, finite elements and the methods of Ritz and Galerkin.
Differential geometry of surfaces. Elastic theory of general shells with nonorthogonal curvilinear coordinates. Specialization to cylindrical shells, shells of revolution and translational shells. Exact and approximate solutions applied to the bending membrane theories of thin shells. Approximate methods including finite differences, finite elements and methods associated with Ritz, Galerkin, Puchler and Gaeckler.
Survey of numerical methods as applied to FEM software. Database management, equation solvers, eigen value routines and schemes for direct integration (both implicit/explicit), all as employed in the development of a finite element program. Topics covered also include band and front minimizers, static and dynamic substructuring via super elements and sensitivity studies. Same as MAE 538.
FEM as applied to nonlinear problems. Contact problems, the mechanics of large deformation, full and updated Lagrange formulations, review of plasticity, solution algorithms, Eulerian approaches, application to FEM to limit analysis. Same as MAE 539.
Review of blast effects produced by solid phase weapons and their effects on structures and people. Estimation of the risk of a terrorist attack and the corresponding threat. Review of simplified methods for the analysis and design of structures to meet homeland security concerns and procedures to minimize casualties. Analysis of post event fires and how to prevent them. Review of security measures to minimize the effects of blast on buildings and people.
Geographic information system (GIS) technology allows users to combine tabular information with maps, creating powerful spatial databases which display and query information in new ways. This course will teach general GIS and GPS skills and concepts, useful to students and practitioners in a variety of disciplines. Students will complete a final GIS project relevant to their field of study. This hands-on class will use ESRI's ArcView and Spatial Analyst products, as well as Trimble GeoExplorer GPS units.
Types of asphalt and physical properties of asphalt. Types of mixes: dense graded, open graded, base courses, and maintenance mixes. Types of pavement structures and hot mix asphalt placement. Aggregate physical properties, tests, and blending. Maintenance and rehabilitation materials. Mixture design procedures, including Marshall and Hveem procedures, and weight-volume relationships. Evaluation of mixture properties, engineering property's importance to performance, resilient modulus, fatigue, and creep testing, and thermal cracking properties. Laboratory included.
Pavement management systems (PMS) concepts, network definition, condition survey, pavement condition index (PCI), non-destructive deflection testing (NDT), measurement of roughness and skid resistance, micropaver PMS, PMS implementation, project and network-level management, maintenance alternatives, development of annual and long-range work plans.
Fundamental theory of supply and demand, transportation economics, network equilibrium, land use and transportation equilibrium. Demand models: trip generation, geographical distribution, mode split, route assignment, the direct-demand model and disaggregate-behavioral-demand models. Special properties of models. Relationships among models.
Exploration of the goals of urban transportation. Program planning in relating transportation technology to social, economic, and environmental systems. Systems analysis in forecasting urban land use and travel demand and evaluating alternatives in transportation planning to reach a balance between demand and supply.
Studies of space and time distribution of speed and other traffic characteristics in the transportation network. Macro, micro, and mesoscopic traffic flow theories. Simulation in traffic networks. Application of flow theories to traffic control and operations.
Operational and economic characteristics of urban systems. Transit planning process: demand for transit, transit routing, transit scheduling, network design. Improvements of existing systems and exploration of new technologies.
Data collection, statistical analysis, and interpretation of traffic information. Advanced traffic engineering topics such as signaling, street-and-highway capacity analysis, and highway safety research.
Transportation as a system. Problems of traffic congestion, land use/transportation intersection; intersection control; freeway and arterial incident management; safety considerations; evaluation of strategies; case studies.
Application of managerial, micro- and macroeconomic concepts to transportation systems. Investment and impact analysis. Transport policy as it relates to social, economic and environmental issues. Legislative actions affecting transport issues.
Theory and design of prestressed concrete members and structure. Applications to both simple and continuous girder and frames subjected to stationary or moving loads. Prestressed cylindrical shells.
Hands-on experience with energy and indoor air quality measurements in buildings including experimental design, data analysis, and experimental statistics. Measurements and techniques covered include: thermal performance (e.g., thermal conductivity and resistance, heat flux, and temperature); fluid flows and HVAC characteristics (e.g., velocity, pressure, and airflow); energy performance (e.g., current, voltage, and power draw); whole building diagnostics (e.g., blower door and duct blaster); and indoor air quality (e.g., tracer gas techniques for air exchange, particle measurements, and gas measurements). Course combines lectures and field measurements in buildings on campus.
Concepts and principles of transportation economic analysis, transportation costs and benefits, user and nonuser consequences, needs studies, finance and taxation, methods for evaluation of plans and projects, cost-efficiency, cost-effectiveness, environmental impact assessment, and economic development assessment.
This is a project-based course in which students will compete in the Department of Energy's annual Race to Zero home design competition. The goal is for an interdisciplinary team of students to design and provide full documentation for a home that meets the Department of Energy's Zero Energy Ready Home Requirements. Teams are expected to effectively and affordably integrate principles of building science, construction engineering and management, economic analysis, and architectural design in an integrated design process. Teams will be required to submit full sets of plans, drawings, renderings, construction details, and analyses for energy efficiency, costs, and affordability. The competition is designed to provide the next generation of architects, engineers, construction managers, and entrepreneurs with skills and experience to start careers in clean energy and generate creative solutions to real-world problems. CAE 556 is the first course in a two-course series. CAE 556 focuses on aspects of the building design. Priority is given to Architectural Engineering and Architecture majors.
This is a project-based course in which students will compete in the Department of Energy's annual Race to Zero home design competition. The goal is for an interdisciplinary team of students to design and provide full documentation for a home that meets the Department of Energy's Zero Energy Ready Home Requirements. Teams are expected to effectively and affordably integrate principles of building science, construction engineering and management, economic analysis, and architectural design in an integrated design process. Teams will be required to submit full sets of plans, drawings, renderings, construction details, and analyses for energy efficiency, costs, and affordability. The competition is designed to provide the next generation of architects, engineers, construction managers, and entrepreneurs with skills and experience to start careers in clean energy and generate creative solutions to real-world problems. CAE 557 is the second course of a two-course series. CAE 557 focuses on the final project reporting and submission. Priority is given to Architectural Engineering and Architecture majors.
Fundamental concepts of plasticity in the design of steel structures. Principle of plastic hinges. Upper and lower-bound theorems. Alternating plasticity and incremental collapse. Analysis and design of single story and multi-story framed structures.
Fundamentals of probability theory and stochastic processes; statistical analysis of engineering data; probabilistic modeling of structural loads and material properties. Reliability analysis and design of structure, reliability-based design criteria. Evaluation of existing design codes. Safety analysis of structures under fatigue loads. Fault and event tree analysis.
Soil mineralogy and soil fabric, soil-water electrolyte system, dispersive clay, stress and strain analyses, elastic equilibrium in soil masses, plastic equilibrium in soil masses, in situ and laboratory stress paths, shear strength of sands and clays, thermal properties of soils, critical state soil mechanics principles, nonlinear pseudo elastic and elastoplastic constitutive models.
Advanced aspects of soil property measurement with application to design and analysis, system characteristics on soil sediment, pinhole test for identifying dispersive clays, consolidation, triaxial compression and triaxial extension with porewater measurement, cyclic triaxial test, permeability with back pressure, determination of critical void ratio.
Consolidation phenomena, derivation of bearing capacity equations, beams and slabs on soils, piles and pile groups, compaction, earth pressure theories and pressure in embankment, slope stability analyses, retaining structures, embankment design, soil structure interaction during excavation, design of anchors for landslide stabilization and retaining structures and instrumentation.
Rock classification for engineering purposes, mechanical behavior of rocks, in situ stresses in rock, stresses around underground openings, rock slope engineering, design of underground structures, design of deep support excavation and tunnels, primary and secondary linings of tunnels, mined shafts, instrumentation.
Earthquakes and their intensity, influence of group motion, review of I-DOF and M-DOF systems, wave propagation theories, vibration due to blast and shock waves, design earthquake motion, dynamic properties of soils, soil liquefaction, bearing capacity during earthquakes and design of machine foundations, isolation of foundations, pile foundation, and dynamic analysis, earth pressure during earthquakes on retaining structures and embankment.
Processes and techniques for managing the preservation and expansion of highway transportation facilities such as pavements, bridges, and traffic control and safety hardware; system usage concerning mobility, safety and security, energy consumption, and vehicle emissions; and economic development impacts. Five component management systems are first examined: pavements, bridges, traffic control and safety hardware, roadway maintenance, safety, and congestion. Finally, the methodology for overall transportation asset management is discussed. The primary emphasis is on data collection, database management, performance modeling, needs assessment, project evaluation, project selection, program development strategies, risk and uncertainty modeling, and institutional issues.
This course introduces students to the legal aspects of engineering and construction, contract documents, and contract clauses. Upon completion of this course, students will be able to do the following: (1) identify the elements of contract formation; (2) interpret contract clauses; (3) explain the rights and duties of the parties involved in design and construction; and (4) evaluate changes and their root causes. Students will also be able to objectively identify and analyze legal liabilities and the expected professional standard of architects, engineers, and contractors.
This course introduces students to lean principles and the lean project delivery system (LPDS) applied to the construction industry. Lean construction and lean project delivery embrace concepts and techniques originally conceived in the automobile manufacturing industry and adopted by the construction industry. In the manufacturing sector, lean production has revolutionized product manufacturing, resulting in significant gains in plant productivity, reliability, and reductions in defects. Specific concepts that will be covered in this course include Plan-Do-Check-Act continuous improvement, A3 reporting, value stream mapping, pull systems and pull planning, kanban, 5S, standardization, and the Choosing by Advantages Decisionmaking System.
Review of basic accounting principles and techniques--purchasing, accounts payable, invoicing, accounts receivable, general ledger, payrolls and indirect costs. Job costing and budgeting. Recording and reporting procedures in construction projects--invoices, subcontractor applications for payment, labor time cards, unit completion reports, change orders. Cost coding systems for construction activities. Variance reporting procedures. Project closeout. Class exercise using computer program.
Fundamentals and practical use of information technologies in the construction industry; basic concepts of building information modeling (BIM); review of software and technology available for BIM; practical use of BIM including design and clash detection; impact of BIM on construction management functions; construction scheduling and sequencing using BIM; cost estimating using BIM; facility management with BIM; integrated approach to navigate BIM as a multi-disciplinary design, analysis, construction, and facility management technology; class exercise to create a BIM model and to use it in scheduling, sequencing, cost estimating, management, and simulation of a construction project.
Basic economic concepts including interest calculations, economic comparison of alternatives, replacement decisions, depreciation and depletion, tax considerations, and sensitivity analysis. Evaluation of public projects, the effect of inflation, decision making under risk and/or uncertainty, economic decision models. Case studies from the construction industry.
Management and system concepts, linear programming, graphical methods, Simplex, two-phase Simplex, the transportation problem, the assignment problem, integer programming, and sensitivity analysis. System modeling by activity networks; maximal-low flow, longest-path and shortest-path analyses, flow graphs, decision-tree analysis, stochastic-network modeling, queuing systems, and analysis of inventory systems. Case studies from the construction industry.
Factors affecting the selection of construction equipment. Descriptions, operating methods, production rates, unit costs related to excavating equipment. Power shovels, draglines, clam shells, and trenching machines. Engineering fundamentals. Moving construction equipment, including trucks, wagons, scrapers, dozers, soil-stabilization and compaction equipment. Belt conveyors, compaction and drilling equipment, pile driving equipment, pumps and crushers.
This course provides a basic explanation of construction contract claims by types such as delays, acceleration, and scope issues, the underlying legal theories of the contract construction and claims, elements required for each claims type defenses to the claim, prophylactic claims measures. The claims process within the contract and extra-contractual basis's for claims are examined. Resolution of claims by ADR techniques and the formal litigation process are explained. AIA, AGC, and federal claims provisions are described. In addition to construction contract claims other types of claims associated with construction projects are covered such as Surety bond claims and various insurance claims (CGL, Builder's Risk, workers comp, etc)
The objective of this course is to introduce civil engineering students to the real estate process. Students will learn techniques and methodologies for evaluating real estate investment opportunities using engineering economic analysis principles. Students will use Time Value of Money analysis for evaluating real estate transactions, including how to carry out calculations using formulas, financial calculators, and spreadsheets. This course will help civil engineering students learn financial skills that can be applied to professional and personal investment decisions.
The concept of intelligent transportation systems (ITS) involves the use of rapidly emerging information and communication technologies in mitigating congestion and attendant problems. A substantial amount of research and development activities have taken place over the last few decades. This course will provide an introduction to the various aspects of ITS and will focus on ITS planning, technology, big data analysis, and evaluation. In addition, such topics as deployment, financing, and management are also discussed. The course will include guest lectures and possibly field visits.
Modeling and analysis of transportation network problems through the design, analysis, and implementation of algorithms. Emphasis on the use of quantitative and qualitative methods of operations research to model system performance. Covers fundamental data structures, complexity analysis, memory management, recursive programs, application of graph theory, and network analysis to transportation problems, analytical formulations, and solution algorithms for origin-destination estimation, static and dynamic traffic assignments, and transportation resource allocation.
Introduction to nature of wind, aerodynamic wind-loading and design. Strong ground motion phenomenon. Investigation of the response of structures to dynamic and pseudo dynamic wind, earthquake, shock waves and other deterministic and probabilistic loadings. Design criteria for buildings and nuclear power stations, special topics in lifeline earthquake engineering.
This course covers performance-based structural and seismic design (PBSSD) for buildings and bridges. The course will begin with brief reviewing and critical discussion on conventional code-based seismic design followed by the development of the concept and applicability of this new alternative and advanced PBSSD. Computer methods in linear dynamic, nonlinear static, and dynamic analyses will be surveyed and discussed as primary tools in PBSSD. Ample case studies from real-world projects are carried out throughout the course. These case studies include the PBSSD of special structures, tall buildings, and those that building code-based design is not applicable.
Basic principles of storm water management; hydrology and hydraulics of excess water; excess water management and design; sewer system design and management, storm water detention systems; flood plain system design; risk based design of drainage systems; practical and case study problems.
The course covers six topics, as listed in the course outline, on seismic design of steel and R/C building structures and bridges. In addition to offer fundamentals and experiences in seismic design through design examples, it is also assumed that structural engineers who are preparing for their Structural Engineer License Exam might find extremely helpful.
Groundwater geology and flow, response of ideal aquifer to pumping. Chemical properties and principles including source of contamination and estimation of saturated hydraulic conductivity. Principles of exploration and sampling, methods of subsurface explorations, groundwater observation techniques. Instructor permission required.
Regulatory and legal issues, site selection and assessment, geotechnical-subsurface investigation, clay mineralogy and clay-water-electrolyte system, linear and leachate-control-systems design, stability of landfill slopes, cover design, construction and operation, final use and remediation design.
Research and Thesis for M.S. Degree.
Reports on current research. Graduate students are expected to register and attend.
Graduate course work in the problem subject matter. Subject matter will vary with the interests and background of students and instructor. Design or research problems may be assigned from the areas of architectural, construction, geotechnical, geoenvironmental, structural, or transportation engineering.
A special topic in civil or architectural engineering at the graduate level.
Research and Thesis for Ph.D. degree.
This short course provides a brief introduction to the fundamentals of acoustics and the application to product noise prediction and reduction. The first part focuses on fundamentals of acoustics and noise generation. The second part of the course focuses on applied noise control.