Master of Engineering in Manufacturing Engineering
This program is aimed at broadening student potential beyond the B.S., enhancing technical versatility and, in some instances, providing the opportunity for changes in career path. The master of engineering program is a course-only degree program and requires a minimum of 30 credit hours. There is no thesis or comprehensive examination requirement. The student, in consultation with their adviser, prepares a program of study that reflects individual needs and interests. The adviser, as well as the department’s graduate studies committee, and the department chair must approve this program. Students working toward this degree are not eligible for departmental financial support.
Curriculum
Materials Science and Engineering Emphasis
Code | Title | Credit Hours |
---|---|---|
Required Courses | (12) | |
MMAE 547 | Comp Intgrted Manuf Technlgies | 3 |
MMAE 560 | Ststcl Quality Procs Control | 3 |
Select a minimum of one course from the following: | 3 | |
Computer-Aided Design | 3 | |
Advanced CAD/CAM | 3 | |
Adv Manufacturing Engineering | 3 | |
Materials Process Selection | 3 | |
Select a minimum of one course from the following numerical methods courses: | 3 | |
Finite Elmnt Methods in Engrg | 3 | |
Computational Fluid Dynamics | 3 | |
Finite Element Methods II | 3 | |
Design Optimization | 3 | |
Computational Methods in MSE | 3 | |
Elective Courses | (18) | |
Select 18 credit hours | 18 | |
Total Credit Hours | 30 |
Mechanical and Aerospace Engineering Emphasis
Code | Title | Credit Hours |
---|---|---|
Required Courses | (18) | |
MMAE 545 | Advanced CAD/CAM | 3 |
MMAE 546 | Adv Manufacturing Engineering | 3 |
MMAE 547 | Comp Intgrted Manuf Technlgies | 3 |
or MMAE 557 | Comp Intgrtd Manfctrng Systms | |
MMAE 560 | Ststcl Quality Procs Control | 3 |
Select a minimum of one course from the following: | 3 | |
Computer-Aided Design | 3 | |
Materials Process Selection | 3 | |
Engg Optics & Laser-Based Manu | 3 | |
Select a minimum of one course from the following numerical methods courses: | 3 | |
Finite Elmnt Methods in Engrg | 3 | |
Computational Fluid Dynamics | 3 | |
Finite Element Methods II | 3 | |
Design Optimization | 3 | |
Computational Methods in MSE | 3 | |
Elective Courses | (12) | |
Select 12 credit hours | 12 | |
Total Credit Hours | 30 |