Master of Science in Manufacturing Engineering
The master of science degree program advances knowledge through post-baccalaureate coursework. The program requires 32 credit hours. Students have the option of completing a thesis based on up to eight credit hours of research (MMAE 591) with the approval of a thesis adviser, or completing the program with courses, which may include up to six credit hours of projects (MMAE 594). In line with the department's approach to its graduate programs, a student has considerable flexibility, in consultation with their adviser, in formulating an M.S. program. All full-time thesis students are required to register for MMAE 593 MMAE Seminar in every semester and achieve an attendance of greater than 80%.
Before completion of the first semester of graduate study, full-time students should select a permanent adviser. Graduate students pursuing the M.S. degree on a part-time basis should select a permanent adviser before registering for their twelfth credit hour. The student, in consultation with the adviser, prepares a program of study that reflects individual needs and interests. The adviser as well as the department's graduate studies committee and the department chair must approve this program. Students with the thesis option are required to pass an oral comprehensive examination on their thesis and related topics. The examination committee consists of at least three appropriate faculty members who are nominated by the thesis adviser and appointed by the department's graduate studies committee.
Master of Science in Manufacturing Engineering, Materials Science and Engineering Emphasis (Coursework Only Option)
Minimum Credits Required | 32 |
Maximum 400-Level Credit | 12 |
Maximum 700-Level Credit | 6 |
Code | Title | Credit Hours |
---|---|---|
Required Courses | (18) | |
MMAE 547 | Comp Intgrted Manuf Technlgies | 3 |
or MMAE 557 | Comp Intgrtd Manfctrng Systms | |
MMAE 560 | Ststcl Quality Procs Control | 3 |
MMAE 563 | Advanced Mechanical Metallurgy | 3 |
MMAE 569 | Advanced Physical Metallurgy | 3 |
Select a minimum of three credit hours from the following: | 3 | |
Computer-Aided Design | 3 | |
Advanced CAD/CAM | 3 | |
Adv Manufacturing Engineering | 3 | |
Materials Process Selection | 3 | |
Select a minimum of three credit hours from the following: | 3 | |
Finite Elmnt Methods in Engrg | 3 | |
Computational Fluid Dynamics | 3 | |
Finite Element Methods II | 3 | |
Design Optimization | 3 | |
Computational Methods in MSE | 3 | |
Elective Courses | (14) | |
Select 14 credit hours of 400-level and above MMAE courses 1 | 14 |
1 | Students may include up to six credit hours of MMAE 594. Up to three credit hours of INTM courses may be used with adviser approval. |
Master of Science in Manufacturing Engineering, Materials Science and Engineering Emphasis
(Thesis Option)
Minimum Credits Required | 32 |
Maximum 400-Level Credit | 12 |
Maximum 700-Level Credit | 6 |
Code | Title | Credit Hours |
---|---|---|
Required Courses | (18) | |
MMAE 547 | Comp Intgrted Manuf Technlgies | 3 |
or MMAE 557 | Comp Intgrtd Manfctrng Systms | |
MMAE 560 | Ststcl Quality Procs Control | 3 |
MMAE 563 | Advanced Mechanical Metallurgy | 3 |
MMAE 569 | Advanced Physical Metallurgy | 3 |
Select a minimum of one course from the following; | 3 | |
Computer-Aided Design | 3 | |
Advanced CAD/CAM | 3 | |
Adv Manufacturing Engineering | 3 | |
Materials Process Selection | 3 | |
Select a minimum of one course from the following numerical methods courses: | 3 | |
Finite Elmnt Methods in Engrg | 3 | |
Computational Fluid Dynamics | 3 | |
Finite Element Methods II | 3 | |
Design Optimization | 3 | |
Computational Methods in MSE | 3 | |
Elective Courses | (6-8) | |
Select six to eight credit hours of 400-level and above MMAE courses 1 | 6-8 | |
Thesis Research | (6-8) | |
MMAE 591 | Research and Thesis M.S. | 6-8 |
1 | Students may include up to six credit hours of MMAE 594. Up to three credit hours of INTM courses may be used with adviser approval. |
Master of Science in Manufacturing Engineering, Mechanical and Aerospace Engineering Emphasis (Coursework Only Option)
Minimum Credits Required | 32 |
Maximum 400-Level Credit | 12 |
Maximum 700-Level Credit | 6 |
Code | Title | Credit Hours |
---|---|---|
Required Courses | (18) | |
MMAE 545 | Advanced CAD/CAM | 3 |
MMAE 546 | Adv Manufacturing Engineering | 3 |
MMAE 547 | Comp Intgrted Manuf Technlgies | 3 |
or MMAE 557 | Comp Intgrtd Manfctrng Systms | |
MMAE 560 | Ststcl Quality Procs Control | 3 |
Select a minimum of three credit hours from the following: | 3 | |
Computer-Aided Design | 3 | |
Advanced Mechanical Metallurgy | 3 | |
Advanced Physical Metallurgy | 3 | |
Materials Process Selection | 3 | |
Select a minimum of three credit hours from the following: | 3 | |
Computer-Aided Design | 3 | |
Finite Elmnt Methods in Engrg | 3 | |
Computational Fluid Dynamics | 3 | |
Finite Element Methods II | 3 | |
Design Optimization | 3 | |
Computational Methods in MSE | 3 | |
Elective Courses | (14) | |
Select 14 credit hours of 400-level and above MMAE courses 1 | 14 |
1 | Students may include up to six credit hours of MMAE 594. Up to three credit hours of INTM courses may be used with adviser approval. |
Master of Science in Manufacturing Engineering, Mechanical and Aerospace Engineering Emphasis (Thesis Option)
Minimum Credits Required | 32 |
Maximum 400-Level Credit | 12 |
Maximum 700-Level Credit | 6 |
Code | Title | Credit Hours |
---|---|---|
Required Courses | (18) | |
MMAE 545 | Advanced CAD/CAM | 3 |
MMAE 546 | Adv Manufacturing Engineering | 3 |
MMAE 547 | Comp Intgrted Manuf Technlgies | 3 |
or MMAE 557 | Comp Intgrtd Manfctrng Systms | |
MMAE 560 | Ststcl Quality Procs Control | 3 |
Select a minimum of one course from the following: | 3 | |
Computer-Aided Design | 3 | |
Advanced Mechanical Metallurgy | 3 | |
Advanced Physical Metallurgy | 3 | |
Materials Process Selection | 3 | |
Select a minimum of one course from the following: | 3 | |
Computer-Aided Design | 3 | |
Finite Elmnt Methods in Engrg | 3 | |
Computational Fluid Dynamics | 3 | |
Finite Element Methods II | 3 | |
Design Optimization | 3 | |
Computational Methods in MSE | 3 | |
Elective Courses | (6-8) | |
Select six to eight credit hours of 400-level and above MMAE courses 1 | 6-8 | |
Thesis Research | (6-8) | |
MMAE 591 | Research and Thesis M.S. | 6-8 |
1 | Students may include up to six credit hours of MMAE 594. Up to three credit hours of INTM courses may be used with adviser approval. |